STARTING AND OPERATING
319
The “Tire Pressu re Monitoring Telltale Light” will
illuminate in the instru ment cluster, and an au-
dible chim e will be activated when one or more of
the four active road tire pressu res are low. The audible
chim e will sou nd once every ignition cycle for each
cond ition that it detects. Shou ld this occur, you shou ld
stop as soon as possible, check the inflation pressu re of
each tire on you r vehicle, and inflate each tire to the
pressu re recom mend ed by the vehicle manu factu rer. The
system will autom atically update and the “Tire Pressu re
Monitoring Telltale Light” will extingu ish once the up-
dated tire pressu res have been received . The vehicle may
need to be driven for up to 10 minu tes above 15 mph (25
km/ h) to receive this inform ation. A low spare tire will
not cause the “Tire Pressu re Monitoring Telltale Light” to
illuminate or the chim e to sou nd .
The “Tire Pressu re Monitoring Telltale Light” will flash
on and off for 60 second s, and an audible chim e will
sou nd when a system fault is detected . The flash cycle
will rep eat every ten minu tes, withou t an audible chim e,
until the fault cond ition no longer exists. If the ignition
key is cycled , this sequ ence will rep eat, provid ing the
system fault still exists.
NOTE: In the event that the matching full size spare tire
is swapped with a low pressu re road tire, the next 5
ignition key cycle will still show the “Tire Pressu re
Monitoring Telltale Light” to be ON, and a chim e to
sou nd . Driving the vehicle for up to 10 minu tes above 15
mph (25 kph) will turn OFF the “Tire Pressu re Monitor-
ing Telltale Light” as long as the spare tire or any other
road tire(s) are not below the low pressu re warning
threshold .
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)