THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
45
Enhanced Seat Belt Use Reminder System
(BeltAlert)
The Enhanced Warning System (BeltAlert) can be en-
abled or disabled by you r authorized dealer or by
follow ing these step s:
If the driver or front passenger seat belt has not been
buckled within 60 second s of starting the vehicle and if
the vehicle speed is greater than 5 mph (8 km/ h), the
Enhanced Warning System (BeltAlert) will alert the
driver to buckle their seat belt. The driver shou ld also
instru ct all other occupants to buckle their seat belts.
Once the warning is triggered , the Enhanced Warning
System (BeltAlert) will continu e to chim e and flash the
Seat Belt Warning Light for 96 second s or until the driver
or front passenger seat belt is buckled .
2
NOTE: The follow ing step s must occur within the first
60
second s of the ignition switch being turned to the ON
or START position. The manu factu rer does not recom -
mend deactivating
(BeltAlert).
the Enhanced Warning System
1. Turn the ignition switch to the OFF position, and
buckle the driver or front passenger seat belt.
2.
Turn the ignition key to the ACCESSORY/ RUN posi-
The Enhanced Warning System (BeltAlert) will be reacti-
vated if the driver or front passenger seat belt is unbu ck-
led for more than 10 second s and the vehicle speed is
greater than 5 mph (8 km/ h).
tion (engine does not need to be running), and wait for
the Seat Belt Warning Light to turn off.
3.
Within 60 second s of starting the vehicle, unbu ckle
and then re-bu ckle the driver or front passenger seat belt
at least three times within 10 second s, end ing with the
seat belt buckled .
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)