V8i
OIL SUMP
Service repair no - 12.60.44
Remove
Refit
1.
Drain engine oil See SECTION 10,
Maintenance, Under Vehicle Maintenance
Fit drain plug. Tighten to 40 Nm.
8. Apply RTV Hylosil White sealant to mating
surface of sump.
9. Position sump, tighten bolts finger tight.
2.
3.
If fitted, disconnect low oil level sensor multiplug.
10.
Tighten bolts progressively in sequence shown.
Tighten to 18 Nm.
4.
5.
Remove bolt securing dipstick tube to rocker
cover.
Working form the centre outwards, progressively
loosen and remove 17 bolts securing sump.
Remove sump.
11. Fit bolt securing dipstick tube to rocker cover.
12. If fitted, connect low oil level sensor multiplug.
6.
7.
Remove all traces of sealant from mating
surfaces of sump, cylinder block and front cover,
using a suitable solvent or plastic scraper.
Degrease mating surfaces of sump, cylinder
block and front cover.
REPAIR
15
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)