Tdi
TURBOCHARGER OIL FEED PIPE
Service repair no - 19.42.14
Remove
TURBOCHARGER OIL DRAIN PIPE
Service repair no - 19.42.12
Remove
1.
2.
Disconnect battery negative lead.
1. Disconnect battery negative lead.
2. Remove exhaust front pipe. See MANIFOLD
AND EXHAUST SYSTEM, Repair, Manifold
and Exhaust System - Tdi
Remove exhaust front pipe. See MANIFOLD
AND EXHAUST SYSTEM, Repair, Manifold
and Exhaust System - Tdi
3.
4.
Remove banjo bolt securing oil feed pipe to
turbocharger, discard 2 sealing washers.
Unscrew union, disconnect oil feed pipe from
cylinder block.
3.
4.
5.
Unscrew union and disconnect oil drain pipe
from cylinder lock.
Remove 2 bolts securing oil drain pipe to
turbocharger.
Remove oil drain pipe, remove and discard
gasket.
CAUTION: Plug the connections.
5.
Move oil feed pipe from behind turbocharger and
remove.
CAUTION: Plug the connection.
Refit
6.
Reverse removal procedure. use new sealing
washers.
Tighten banjo bolt to 20 Nm.
Check/top-up engine oil level.
Refit
6.
7.
8.
Ensure mating surfaces of oil pipe, turbocharger
and engine block are clean.
7.
8.
Reverse removal procedure. Use a new gasket.
Tighten oil drain pipe to turbocharger bolts to 25
Nm.
9.
Check/top-up engine oil level.
REPAIR
3
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)