19
FUEL SYSTEM
RELAY MODULE - ADVANCED EVAPS
Service repair no - 18.30.71
Remove
FUEL FILTER - ADVANCED EVAPS
Service repair no - 19.25.02
Remove
WARNING: Spilling of fuel is unavoidable
during this operation. Ensure all
necessary precautions are taken to
prevent fire and explosion.
WARNING: Ensure fuel handling
precautions given in section 1 -
Introduction are strictly adhered to when
carrying out following instructions.
1.
2.
Depressurise fuel system. See fuel system -
depressurise - advanced evaps
Raise rear of vehicle.
WARNING: Support on safety stands.
1.
2.
3.
Release module from bracket.
Disconnect 2 multiplugs from module.
Remove module.
3.
Clean area around hose connections to prevent
ingress of foreign matter into fuel system. Clamp
inlet and outlet hoses to prevent fuel spillage
when disconnecting hoses.
Refit
4.
Position module, connect multiplugs and secure
to bracket.
4.
5.
Loosen 2 fuel line unions and disconnect hoses.
Remove and discard ’O’ rings. Plug ends of
hoses to prevent ingress of dirt.
CAUTION: Use two spanners when
loosening or tightening unions.
Remove nut and bolt securing fuel filter bracket
to chassis and remove filter from bracket.
16
REPAIR
ADD: 09/95
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)