57
STEERING
STEERING COLUMN SHROUD
Service repair no - 57.40.29
Remove
STEERING WHEEL
Service repair no - 57.60.01
CAUTION: Prior to commencing work on
vehicles fitted with an air bag, See
1.
Disconnect battery negative lead.
SUPPLEMENTARY RESTRAINT SYSTEM,
Description and operation,
CAUTION: Before removing any parts of
steering linkage, it is imperative that road
wheels are positioned straight ahead.
Then remove steering wheel to prevent rotary
coupler being wound up or damaged.
CAUTION: After refitting steering linkage
parts follow correct procedure to ensure
that road wheels, steering box and
steering wheel are correctly positioned relative to
each other when in straight ahead condition. If
steering wheel requires repositioning, ensure that
drive pegs on rotary coupler are correctly
positioned before steering wheel is replaced.
This ensures drive pegs locate in their holes in
rear of steering wheel.
2.
3.
4.
Remove 3 screws securing shroud.
Carefully release upper shroud from lower.
Manoeuvre lower shroud clear of steering
column.
After final alignment connect rotary coupler
multiplug, tighten steering wheel securing nut and
fit air bag - if fitted or steering wheel trim pad.
Refit
5.
Position upper and lower shrouds to steering
column ensuring plastic tags on lower shroud
are correctly located. Clip both halves of shroud
together.
6.
Fit and tighten 3 screws.
10
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)