75
SUPPLEMENTARY RESTRAINT SYSTEM
CRASH SENSOR - DISTRIBUTED SRS
Service repair no - 76.74.04
Remove
Refit
6. Reverse removal procedure.
7.
Tighten crash sensor securing screws to 10 Nm
(7 lbf ft). Ensure multiplug is fully engaged on
sensor and retained by its latch.
1.
2.
Disconnect battery negative lead.
LH sensor only: Slacken power steering
reservoir clamp and lift reservoir to provide
access.
8. Check Supplementary Restraint System using
Testbook.
Diesel model only: Remove jack and mounting
bracket.
3.
Disconnect multiplug from sensor
CAUTION: Ensure airbag harness
connector seal and anti-backout DO NOT
come adrift when disconnecting sensor.
4.
5.
Use special socket, remove 2 screws securing
crash sensor to body.
Remove crash sensor.
10
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)