SUPPLEMENTARY RESTRAINT SYSTEM
AIRBAG DIAGNOSTIC CONTROL UNIT -
DISTRIBUTED SRS
Service repair no - 76.74.03
Remove
1.
2.
Disconnect battery negative lead.
Remove centre console assembly. See
CHASSIS AND BODY, Repair, centre
console.
4.
Use flat ended screwdriver and release
YELLOW retainer, pull retainer 30mm (1 1/8 in)
from multiplug and disconnect airbag harness
multiplug from airbag control unit.
5.
6.
Use special socket, remove 2 screws securing
airbag control unit to body bracket.
Remove airbag diagnostic control unit.
Refit
7.
Reverse removal procedure.
3.
Remove 4 screws and release the 2 rear
passenger air ducts from their fitted position and
remove centre console mounting bracket.
8. Tighten control unit securing screws to 10Nm (7
lbf ft).
9. Check Supplementary Restraint System using
Testbook.
REPAIR
11
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)