CHASSIS AND BODY
REAR SIDE DOORS
Service repair no - 76.28.02
Remove
Adjust
8. Adjust the door by adding or removing shims
between the hinge and the door to move the
door forward or rearward in the opening.
9.
To adjust the door up, down or in and out of the
opening, loosen the screws securing the hinges
to the door, adjust as necessary and retighten
the screws to the correct torque value.
1.
2.
Disconnect battery negative lead.
Detach the convoluted grommet from the ’B’
post.
3.
4.
Withdraw the door harness multiplugs from the
’B’ post and disconnect them.
Remove the bolts and washers securing the
check strap to the ’B’ post.
10. Adjustment of the door striker is identical to the
procedure for front doors.
NOTE: If it is necessary to remove the
hinges from the ’B’ post they must be
WARNING: Instruction 5 MUST BE carried
out with assistance.
refitted in exactly the same position, using
an equal thickness of shims to those removed.
5.
Remove the door hinge ’C’ clips from the hinge
posts and with assistance carefully lift the door
from the vehicle.
Refit
6.
Reverse removal procedure. Fitting new ’C’ clips
if the existing ones are worn or distorted.
Check the operation of the door and lock. If
necessary, adjust the door and striker.
7.
REPAIR
7
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)