Mpi
COOLANT PUMP
Service repair no - 26.50.01
Remove
5. Remove coolant pump from housing.
6.
Discard 3 sealing rings.
1.
Position drain tin below coolant pump hose.
WARNING: Do not carry out the next
instruction until the coolant is cool to
avoid personal injury from scalding.
2.
Release clip and disconnect hose from coolant
pump housing cover.
3.
4.
Remove 5 bolts securing housing cover.
Remove housing cover.
Refit
7.
8.
Clean coolant pump housing and mating faces.
Lubricate new sealing rings with Loctite 405 and
fit to coolant pump.
9.
Fit coolant pump to housing.
10.
Position housing cover, fit 5 bolts. Tighten to
25Nm
11.
12.
Connect hose to housing cover and tighten clip.
Refill cooling system.
REPAIR
1
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)