14
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Customer Key Programming
General Information
You can program new keys to the system if you have two
valid keys by doing the follow ing:
The Sentry Key system complies with FCC rules part 15.
Operation is subject to the follow ing two cond itions:
1.
Insert the first valid key into the ignition and turn the
1. this device may not cause harm ful interference
ignition On for at least 3 second s but no longer than 15
second s.
2.
received , inclu ding interference that may cause und es-
ired operation
this device must accep t any interference that may be
Turn the ignition Off and rem ove the first key.
2.
within 15 second s. After ten second s a chim e will sou nd
and the Theft Alarm Light will begin to flash.
Insert the second valid key and switch the ignition On
ILLUMINATED ENTRY SYSTEM
The interior lights will come on when you open any door,
unlock the vehicle with the rem ote keyless entry (if so
equ ipped) or central unlock (if so equ ipped). They will
rem ain on for abou t 30 second s after all doors are closed
then fade to off.
Turn the ignition Off and rem ove the second key.
3.
Insert a blank Sentry Key into the ignition and switch
the ignition On within 60 second s. After 10 second s a
single chim e will sou nd . The Theft Alarm Light will stop
flashing, turn on for 3 second s; then turn off.
The lights also will turn off if you turn on the ignition
after you close all doors.
The new Sentry Key has been program med. Repeat this
process to program up to a total of 8 keys.
| Categories | Chrysler Manuals, Chrysler Sebring Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)