102
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Your vehicle may have been delivered with two Remote
Keyless Entry transm itters. One or both transm itters can
be linked to either memory position. The memory system
can accom modate up to four transm itters, each one
linked to either of the two memory positions.
3. Adjust the driver’s seat, recliner, and driver’s side
view mirror to the desired positions.
4.
Adjust the brake and accelerator pedals to the desired
positions.
5.
to 10 AM and 10 FM stations can be set).
Turn on the rad io and set the rad io station presets (up
Setting Memory Positions and Linking Remote
Keyless Entry Transmitter to Memory
6.
rem ove the key.
Turn the ignition switch to the OFF position and
NOTE: Each time the SET (S) button and a nu mbered
button (1 or 2) are pressed , you erase the memory settings
for that button and store a new one.
7. Press and release the SET (S) button located on the
driver’s door. A chim e will sou nd signaling that you are
in the memory set mode.
1.
Insert the ignition key and turn the ignition switch to
the ON position.
8.
Within 5 second s, press and release memory button 1
2.
Press the driver door memory button nu mber 1 if you
or 2 on the driver’s door. A chim e will sou nd signaling to
you that the driver memory has been set. The next step
must be perform ed within 5 second s if you desire to also
use a Remote Keyless Entry transm itter to recall memory
positions.
are setting the memory for driver 1, or button nu mber 2
if you are setting the memory for driver 2. The system
will recall any stored settings. Wait for the system to
complete the memory recall before continu ing to step 3.
| Categories | Chrysler Manuals, Chrysler Town and Country Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)