UNDERSTANDING THE FEATURES OF YOUR VEHICLE
103
9.
Press and release the LOCK button on one of the
Memory Position Recall
transm itters. A chim e will sou nd signaling to you that the
transm itter has been successfu lly linked to memory.
NOTE: The vehicle must be in Park to recall memory
positions. If a recall is attem pted when the vehicle is not
in Park, a message will be displayed in the Electronic
Vehicle Inform ation Center (EVIC).
10.
Insert the ignition key and turn the ignition switch to
the ON position.
3
To recall the memory settings for driver one, press
memory button nu mber 1 on the driver’s door or the
Unlock button on the Remote Keyless Entry transm itter
linked to memory position 1.
11.
Select ЉRemote Linked to Mem oryЉ in the Electronic
Vehicle Inform ation Center (EVIC) and enter ЉYesЉ or
select ЉUse Factory SettingsЉ from the EVIC and enter
ЉYesЉ. Refer to the Custom er Program mable featu res in
the Electronic Vehicle Inform ation Center (EVIC) section
for more inform ation.
To recall the memory setting for driver two, press
memory button nu mber 2 on the driver’s door or the
Unlock button on the Remote Keyless Entry transm itter
linked to memory position 2.
12.
Repeat the above step s to set the next memory
position using the other nu mbered memory button or to
Remote transm itter
link
another
Keyless
Entry
to
A recall can be cancelled by pressing any of the memory
buttons on the drivers door during a recall (S, 1, or 2).
When a recall is cancelled , the driver’s seat, driver’s
mirror, and the pedals stop moving. A delay of one
second will occur before another recall can be selected .
memory.
| Categories | Chrysler Manuals, Chrysler Town and Country Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)