THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
57
The rear seat lower anchorages are rou nd bars,
located at the rear of the seat cushion where it
meets the seat back. The location of the lower
anchorages are identified by a sym bol on the
seat back. You will easily feel them if you run you r finger
along the intersection of the seatback and seat cushion
surfaces.
hooks or connectors to the vehicle anchorages. Next
attach the lower hooks or connectors over the top of the
seat cover material. Then rotate the tether anchorage
cover directly behind the seat where you are placing the
child restraint and attach the tether strap to the anchor-
age, being carefu l to rou te the tether strap to provid e the
most direct path betw een the anchor and the child
restraint. If you r vehicle is equ ipped with adjustable rear
head restraints, raise the head restraint and , where pos-
sible, rou te the tether strap und er the head restraint and
betw een the two posts. If not possible, lower the head
restraint and rou te the tether strap arou nd the outboard
side of the head restraint. Finally, tighten all three strap s
as you push the child restraint rearw ard and downw ard
into the seat, rem oving slack in the strap s accord ing to
the child restraint manu factu rer’s instru ctions.
2
In addition, there are tether strap anchorages
behind each rear seating position located in the
panel betw een the rear seat back and the rear
wind ow. These tether strap anchorages are
und er a plastic cover with this sym bol on it.
Many, but not all restraint system s will be equ ipped with
separate strap s on each side, with each having a hook or
connector for attachm ent to the lower anchorage and a
means of adjusting the tension in the strap . Forw ard -
facing tod dler restraints and som e rear-facing infant
restraints will also be equ ipped with a tether strap , a
hook for attachm ent to the tether strap anchorage and a
means of adjusting the tension of the strap .
NOTE:
When using the LATCH attaching system to
install a child restraint, please ensu re that all seat belts
not being used for occupant restraints are stow ed and out
of reach of child ren. It is recom mend ed that before
installing the child restraint, buckle the seat belt so the
seat belt is tucked behind the child restraint and out of
reach. If the buckled seat belt interferes with the child
You will first loosen the adjusters on the lower strap s and
on the tether strap so that you can more easily attach the
| Categories | Chrysler 300 Manuals, Chrysler Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2006 Chrysler 300 Owners Manual 5.0 out of 5.0 based on 2 product reviews. the 2006 chryler 300 is a very nice car i enjoy the ride and the way it handles