Convenient features of your vehicle
Programming HomeLink®
Please note the following:
Programming
WARNING
• When programming a garage door
opener, it is advised to park the
vehicle outside of the garage.
Flashing
Before programming HomeLink®
to a garage door opener or gate
operator, make sure people and
objects are out of the way of the
device to prevent potential harm
•
It is recommended that a new bat-
tery be placed in the hand-held
or damage. Do not use the
HomeLink® with any garage door
transmitter of the device being pro-
grammed to HomeLink® for quicker
opener that lacks the safety stop
and reverse features required by
U.S. federal safety standards (this
includes any garage door opener
model manufactured before April
training and accurate transmission
of the radio-frequency signal.
Some vehicles may require the
engine Start/Stop button to be
placed in the ACC position for pro-
•
•
ODH044413N
To train most devices, follow these
instructions:
For first-time programming, press
and hold the two outside buttons
), HomeLink ® Channel 1
and Channel 3, until the indicator
light begins to flash (after 10 sec-
onds). Release both buttons. Do
not hold the buttons for longer
than 20 seconds.
1,
1982). A garage door that can-
gramming and/or operation of
HomeLink®.
not detect an object - signaling
the door to stop and reverse -
does not meet current U.S. feder-
al safety standards. Using a
garage door opener without
these features increases the risk
of serious injury or death.
1.
In the event that there are still pro-
gramming difficulties or questions
after following the programming
(
,
steps
listed
below,
contact
HomeLink® at: www.homelink.com
or by calling 1-800-355-3515.
3-24
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)