System operation
Ventilation
Operation Tips
Air conditioning
•
To keep dust or unpleasant fumes HYUNDAI Air Conditioning Systems
from entering the vehicle through are filled with R-134a refrigerant.
the ventilation system, temporarily
1.
2.
Set the mode to the
Set the air intake control to the
outside (fresh) air position.
position.
1.
Start hybrid system. Push the air
conditioning button.
set the air intake control to the
recirculated air position. Be sure to
return the control to the fresh air
position when the irritation has
passed to keep fresh air in the
vehicle.This will help keep the driv- 4. Adjust the fan speed control and
er alert and comfortable.
2.
3.
Set the mode to the
Set the air intake control to the out-
side air or recirculated air position.
position.
3.
4.
Set the temperature control to the
desired position.
Set the fan speed control to the
desired speed.
3
temperature control to maintain
maximum comfort.
•
•
Air for the heating/cooling system
is drawn in through the grilles just
ahead of the windshield. Care
should be taken that these are not
Heating
1.
2.
Set the mode to the
Set the air intake control to the
outside (fresh) air position.
position.
NOTICE
blocked by leaves, snow, ice or • The refrigerant system should
other obstructions.
To prevent interior fog on the wind-
shield, set the air intake control to
only be serviced by trained and
certified technicians to insure
proper and safe operation.
3.
4.
5.
•
Set the temperature control to the
desired position.
Set the fan speed control to the
desired speed.
If dehumidified heating is desired,
turn the air conditioning system on.
the fresh air position and fan speed • The refrigerant system should
to the desired position, turn on the
air conditioning system, and adjust
the temperature control to desired
temperature.
be serviced in a well-ventilated
place.
•
The air conditioning evaporator
(cooling coil) shall never be
repaired or replaced with one
removed from a used or sal-
vaged vehicle and new replace-
ment MAC evaporators shall be
certified (and labeled) as meet-
ing SAE Standard J2842.
If the windshield fogs up, set the
mode to the
or
position.
3-137
Product Specification
Categories | Hyundai Manuals, Hyundai Sonata Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Sonata |
Document File Type | |
Copyright | Attribution Non-commercial |