Cruise Control operation
During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.
Take the following precautions:
If the Cruise Control is left on,
("CRUISE" indicator light in
the instrument cluster is illu-
minated) the Cruise Control
can be activated unintention-
ally. Keep the Cruise Control
system off ("CRUISE" indica-
tor light OFF) when the Cruise
Control is not in use, to avoid
inadvertently setting a speed.
To activate cruise control, depress
the brake pedal at least once after
turning the ignition switch to the
ON position or starting the engine.
This is to check if the brake switch
which is important part to cancel
cruise control is in normal condi-
Use the Cruise Control sys-
tem only when traveling on
The Cruise Control system allows
you to drive at speeds above 20 mph
• Do not use the Cruise Control
when it may be unsafe to keep
the vehicle at a constant
km/h) without depressing the
Driving in heavy or varying
On slippery (rainy, icy or
snow covered) roads.
Hilly or winding roads.
Very windy areas.
|Categories||Hyundai Manuals, Hyundai Sonata Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Sonata|
|Document File Type|
(0 votes, average: 0 out of 5)