What to do in an emergency
Distributing the sealant
4. Adjust the tire inflation pressure to
the recommended tire inflation.
With the ignition switched on, pro-
ceed as follows.
Immediately drive approximately
4~6miles (7~10km or about 10
minutes) to evenly distribute the
sealant in the tire.
Do not exceed a speed of 50 mph
To increase the inflation pres-
km/h). If possible, do not fall
Switch on the compressor, posi-
tion to [I]. To check the current
inflation pressure setting, briefly
switch off the compressor.
below a speed of 12 mph (20 km/h).
While driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive
with caution until you can safely pull
off of the side of the road.
To reduce the inflation pres-
Checking the tire inflation pres-
(7~10km or about
minutes), stop at a safe loca-
Loosen the screw cap (8) on the
Never use a puncture-repairing
agent not approved by HYUNDAI
dealer to repair and/or inflate a
low pressure tire. Tire sealant
not approved by HYUNDAI deal-
er may damage the tire pressure
The pressure gauge may show higher
Connect hose (9) of the compres- than actual reading when the com-
sor directly to the tire valve.
pressor is running. To get an accurate
tire pressure, the compressor needs to
be turned off.
Plug the compressor power cord
into the vehicle power outlet.
|Categories||Hyundai Manuals, Hyundai Sonata Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Sonata|
|Document File Type|
(0 votes, average: 0 out of 5)