1995 Land Rover Discovery Workshop Manual

Tdi
OIL TEMPERATURE CONTROL VALVE
Service repair no - 12.60.69
Remove
OIL FILTER HEAD GASKET
Service repair no - 12.60.03
Renew
1.
2.
Disconnect oil cooler pipes.
1.  Disconnect oil cooler pipes.
2.  Disconnect pressure switch lead.
3.  Remove securing bolts and withdraw head
complete with gasket.
Remove two bolts and carefully withdraw
thermostat extension housing (1) complete with
O ring seal (2), thermostat (3), two washers (4)
and spring (5).
4.  Clean mating faces.
3.
4.
Clean adaptor housing.
Inspect all parts and renew as necessary.
5.  Refit head with new gasket.
6.  Secure with bolts.  Tighten to 45 Nm.
7.
Refit pipes and reconnect pressure switch.
Refit
5.
Fit thermostat to extension housing ensuring pin
locates in hole.
6.
7.
8.
Fit two washers and spring to thermostat.
Fit a new ’O’ ring to extension housing.
Insert spring into adaptor and secure extension
housing to adaptor with bolts. Tighten to 9 Nm.
REPAIR
19
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field