Tdi
VACUUM PUMP
Service repair no - 70.50.19
Remove
GENERATOR
Service repair no - 86.10.02
Remove
NOTE: To ease pump removal set engine
1. Disconnect battery negative lead.
to T.D.C. on No.1 cylinder.
2. Remove drive belt. See Drive Belt Renew
3.
Disconnect electrical leads from rear of
generator.
1.
2.
Disconnect battery negative lead.
Detach servo hose from vacuum pump.
4. Remove securing bolt from bottom of generator.
5.
Remove long through bolt from top fixing and
withdraw generator.
3.
4.
Remove six bolts securing vacuum pump.
Detach pump complete with harness bracket.
Note location of bracket for refitting.
Refit
6.
Refit
Reverse removal procedure.
5.
6.
Clean mating faces of pump and block.
Loosely assemble pump to block with a new
gasket and with harness bracket located under
head of bolt noted during removal.
7.
Evenly tighten bolts, to depress pump plunger,
finally tightening to 25 Nm.
8.
9.
Connect vacuum hose and secure with clip.
Reconnect battery negative lead.
REPAIR
23
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)