BRAKES
REAR BRAKE CALIPERS
Repair
Service repair no - 70.55.06
Service repair no - 70.55.17
Do not separate caliper halves
7.
Clean outer surfaces of caliper with aerosol
brake cleaner.
Service tool:
LRT-50-700 - Piston clamp
8. WITH CAUTION expel pistons from their bores
by applying air pressure to fluid inlet port. It is
unlikely both pistons will expel at same time,
regulate rate with a suitable piece of wood
inserted between two pistons.
Before starting repair refer to general brake service
practice. See General Brake Service Practice
Remove caliper
1.
2.
Loosen rear road wheel nuts. Jack up vehicle,
lower onto axle stands, remove wheels.
Using a recognised hose clamp, clamp flexible
brake hose above rear axle.
3.
4.
5.
Remove brake pipe(s) from rear brake caliper(s).
Seal pipe ends to prevent ingress of dirt.
Remove retaining pins and springs and withdraw
pads. If same pads are to be refitted, identify
them for assembly in original positions.
Remove two bolts, withdraw caliper from axle.
6.
9.
Finally, remove pistons keeping them identified
with their respective bores.
10.
Remove wiper seal retainer by inserting a blunt
screwdriver between retainer and seal and pry
retainer carefully from mouth of bore.
Taking care not to damage seal grooves, extract
wiper seal and fluid seal.
Clean bores, pistons and particularly seal
grooves using clean brake fluid only. If caliper or
pistons are corroded or their condition is not
perfect new parts must be fitted.
11.
12.
REPAIR
15
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)