1995 Land Rover Discovery Workshop Manual

STEERING
FRONT WHEEL ALIGNMENT
Service repair no - 57.65.01
Checking Toe-out dimensions
NOTE: No Adjustment is provided for
castor, camber or swivel pin inclinations.
1.
Set vehicle on level ground with road wheels
positioned straight ahead.
2.
3.
Push vehicle back and forwards to settle linkage.
Measure toe-out at horizontal centre-line of
wheels.
4.
Check tightness of clamp bolt fixings. Tighten to
14
Nm.
Adjust
5.
6.
7.
Loosen adjuster sleeve clamp.
Rotate adjuster to lengthen or shorten track rod.
Check toe-out setting as instructions 1 to 4.
When toe-out is correct, tap steering linkage ball
joint, in directions of arrows shown, to maximum
of their travel. This ensures full unrestricted
working travel.
8.
Tighten clamp bolts to 14 Nm.
POWER STEERING PUMP DRIVE BELT
Service repair no - 57.20.01
Adjust
NOTE: For details of drive belt adjust
procedure  See ENGINE, Repair, Drive
Belt
ADJUSTMENT
3
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field