1995 Land Rover Discovery Workshop Manual

76
CHASSIS AND BODY
27.
Remove protective coverings and tape.
28.
29.
Pierce top and pre-cut nozzle to sealer cartridge,
remove lid and shake out crystals and install
cartridge in applicator gun.
Apply a continuous bead of adhesive sealant
around the glass as shown. Vertical edge of
sealer to abut finishers and to be 8mm (5/16 in)
from bottom edge of glass.
24.
Ensure body flanges and surfaces covered by
the finishers are clean.
30.
Remove protective covering (RED) from side
finisher sealing strip.
25.
26.
Shake the primer container for at least 30
seconds.
Using a cotton bud, apply Glass Primer (green
cap) to inside face of glass, 20mm (13/16 in)
strip around inside of finishers and 30mm (1 1/8
in) wide along bottom edge. This must be touch
dry before applying adhesive.
52
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field