1995 Land Rover Discovery Workshop Manual

MFI
25.
26.
Remove three bolts securing throttle bracket to
plenum chamber, withdraw bracket assembly.
Remove tab washer and throttle stop lever from
throttle shaft.
31.  Grease new bush with Admax L3 or Energrease
LS3. Assemble bush into housing. Assemble to
throttle bracket using two 4.7 mm (3/16 in)
diameter domed head rivets.
32.
Examine bearing surface of countershaft
assembly. If worn fit new assembly, otherwise
wind throttle return spring off levers.
Throttle lever assembly - inspect and overhaul
27.
28.
29.
Remove two retaining clips from spherical bush.
Remove the countershaft assembly.
If spherical bush worn, drill out two securing
rivets (4,7 mm, (3/16 in) diameter drill).
Split assembly, discard worn bush.
33.  Wind new spring onto countershaft assembly,
small hooked end of spring is wound on first.
30.
34.
35.
Grease shaft with Admax L3 or Energrease LS3,
fit countershaft assembly to spherical bearing,
secure with two clips.
Examine throttle stop lever for wear, fit a new
lever if necessary.
REPAIR
11
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field