1995 Land Rover Discovery Workshop Manual

AIR CONDITIONING
EXPANSION VALVE - REAR
Service repair no - 82.26.07
Remove
Refit
8.  Position expansion valve probe to evaporator
pipe and secure with clip.
9.  Remove plugs from expansion valve and
connections.
1.
Remove evaporator/blower motor assembly.
See  evaporator/blower motor assembly -
rear
10.  Lubricate NEW ’O’ rings and fit to pipes.
11.  Position expansion valve to pressure pipe and
tighten union to 14 Nm .
12.
Position expansion valve to evaporator pipe and
tighten union to 22 Nm .
CAUTION: Use 2 spanners when loosening
or tightening air conditioning pipe unions.
13.
14.
15.
Remove backing paper from NEW foam
insulation.
Fit foam insulation to expansion valve and
expansion valve probe.
Fit evaporator/blower motor assembly. See
evaporator/blower motor assembly - rear;
Refit
2.
Remove foam insulation from expansion valve
and expansion valve probe.
3.
4.
Remove expansion valve probe retaining clip.
Loosen expansion valve unions.
CAUTION: Use 2 spanners when loosening
or tightening air conditioning pipe unions.
5.
Remove and discard ’O’ rings from evaporator
and air conditioning pipes.
6.
7.
Plug expansion valve and connections.
Remove expansion valve.
REPAIR
17
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field