19
FUEL SYSTEM
Refit
12.
IGNITION COILS
Fit ignition coil to bracket. Secure with screws.
Service repair no - 18.20.45 - Set
Service repair no - 18.20.43 - Each
Service repair no - 18.20.44 - Extra - Each
13. Connect leads to terminals. Secure with nuts.
14. Fit terminal cover.
15. Position ignition coil bracket on inlet manifold
studs.
Remove
16. Secure fuel rail and ignition coil bracket with
nuts. Tighten to 8 Nm.
1.
Disconnect battery negative lead.
17. Connect multiplug.
18.
19.
Connect H.T. leads to respective coil towers.
Reconnect battery negative lead.
2.
Disconnect H.T. leads from ignition coils. Note
positions of leads.
3.
4.
5.
6.
Place H.T. leads aside.
Disconnect ignition coil multiplug.
Remove 4 nuts securing coil bracket.
Release ignition coil bracket from inlet manifold
studs.
7.
Manoeuvre coil/bracket assembly from behind
plenum chamber and remove.
8.
9.
10.
11.
Remove terminal cover. Note lead positions.
Remove 2 nuts securing leads to coil terminals.
Remove leads from terminals.
Remove 3 Torx screws securing ignition coil to
bracket and remove coil.
8
REPAIR
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)