1995 Land Rover Discovery Workshop Manual

Mpi
FUEL PRESSURE REGULATOR
Service repair no - 19.45.06
Remove
1.
2.
Disconnect battery negative lead.
Position absorbant cloth around fuel pipe to fuel
rail union. Loosen bolt to relieve pressure.
Re-tighten bolt.
Refit
9.
Examine flexible mounting for splits or damage;
renew as necessary.
10.
Thoroughly clean throttle housing and mating
face of flexible mounting.
3.
Release clip and disconnect fuel hose from
pressure regulator.
11.
12.
Connect breather hose to throttle housing.
Position throttle housing to mounting studs, fit
nuts.  Tighten to 7 Nm.
Connect throttle cable to cam.
Adjust throttle cable.
Connect multiplug to stepper motor.
Connect multiplug to throttle potentiometer.
Connect hose to throttle housing, tighten clip.
CAUTION: Plug the connectors.
13.
14.
15.
16.
17.
4.
5.
Disconnect intake air temperature sensor
multiplug.
Remove 4 bolts securing pressure regulator
steady bracket to fuel rail and manifold, remove
steady bracket.
6.
Disconnect vacuum hose from pressure
regulator.
7.
8.
Manoeuvre pressure regulator from fuel rail.
Discard ’O’ ring.
REPAIR
9
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field