FRONT AXLE AND FINAL DRIVE
Fit driveshaft and stub axle
FRONT STUB AXLE, CONSTANT VELOCITY JOINT
AND SWIVEL PIN HOUSING ABS
59.
Insert axle shaft, and when differential splines
are engaged, push assembly in fully.
Service repair no - 60.15.43.
CAUTION: Take care not to damage axle
shaft oil seals.
Remove stub axle, axle shaft and constant
velocity joint.
60.
61.
Place a new joint washer in position on swivelpin
housing to stub axle mating face. Coat threads
of stub axle bolts with Loctite 270.
1. Remove front hub assembly. See Repair,
Front Hub Assembly
2. Drain swivel pin housing and refit plug.
3. Remove six bolts retaining stub axle to swivel
housing.
Fit stub axle with flat at 12 o’clock position.
CAUTION: Ensure that constant velocity
joint bearing journal is butted against
thrust ring on stub axle. Before stub axle
4. Remove mud shield.
5. Remove stub axle and joint washer.
is secured.
62.
Place mud shield in position and secure stub
axle to swivel pin housing with six bolts and
tighten evenly to 65 Nm.
63.
64.
Fit brake jump hoses to brake jump hose
bracket.
Fit front hub complete assembly. See Repair,
Front Hub Assembly
65.
66.
Check swivel pin housing oil drain plug is fitted.
Fill swivel assembly to correct level, with new oil.
See SECTION 10, Maintenance, Under
Vehicle Maintenance
67.
Set steering lock stop bolts to provide a
clearance of 20mm. See STEERING,
Adjustment, Steering Lock Stops
6.
Pull out axle shaft and constant velocity joint
from axle casing.
OVERHAUL
7
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)