1995 Land Rover Discovery Workshop Manual

76
CHASSIS AND BODY
REAR OUTER SEATS BELT
Service repair no - 76.73.18
Remove
1.
2.
Remove the rear fold down seat (if applicable).
See  rear fold down seats.
Remove the speaker by releasing the screws
and disconnecting the Lucars. Withdraw the rear
quarter trim panel.
3.
4.
5.
6.
Remove the rear bodyside lower trim panel. See
rear compartment lower trim panels.
Remove the bolts securing the brackets to the
wheel arch and upper bodyside.
Remove the bolt securing the inertia reel to the
bodyside and withdraw the seat belt.
Remove the seat belt buckle strap from the floor
mounted bracket.  See  rear centre seat belt.
8.
Release the Torx bolt to allow removal of the
seat belt stalk assembly.
Refit
9.
Reverse removal procedure.
NOTE: Ensure the seat belt is not twisted.
10.
Finally, tighten the seat belt bolts to 32 Nm (24
lbf ft)  .
Refit
7.
8.
Reverse removal procedure.
Finally, tighten the seat belt bolts to 32 Nm (24
lbf ft)  .
30
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field