1995 Land Rover Discovery Workshop Manual

47
PROPELLER SHAFTS
REAR PROPELLER SHAFT
Service repair no - 47.15.03
FLEXIBLE COUPLING
NOTE: Flexible coupling should only be
removed if a new coupling is to be fitted.
NOTE: SGF rubber coupling should be left
attached to propeller shaft. Only remove
coupling from propeller shaft if
Remove
replacement is required.
1.  Remove rear propeller shaft. See  Rear
Propeller Shaft.
Remove
2.  Remove nuts and bolts securing flexible
coupling to propeller shaft.
1.
2.
3.
4.
Scribe alignment marks on flanges at both ends
of propeller shaft to ensure correct refitting.
Remove three nuts and bolts securing flexible
coupling to axle flange.
Remove nuts securing propeller shaft flange to
transfer gearbox.
Raise propeller shaft at gearbox end detach
coupling from spigot at differential and withdraw
shaft.
Refit
3.  Reverse removal procedure. Fit nuts and bolts.
Tighten to 78 Nm.
NOTE: For replacement of spigot (pinion
flange centralising peg).  See REAR AXLE
AND FINAL DRIVE, Overhaul, Axle
Differential Assembly
Overhaul
Service repair no - 47.15.12
NOTE: Refer to front propeller shaft
overhaul procedure for gearbox end of
shaft. The SGF rubber coupling is a
non-serviceable item.
Refit
5.
Locate flexible coupling over spigot, align
scribed marks and secure at transfer gearbox.
Tighten to 47 Nm.
6.
Secure flexible coupling to axle flange with three
nuts and bolts and  Tighten to 78 Nm.
4
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field