1995 Land Rover Discovery Workshop Manual

26
COOLING SYSTEM
WATER PUMP
Service repair no - 26.50.01
Remove
WARNING: Disconnect battery negative
terminal to prevent engine being started
before removing or adjusting drive belts.
1.
2.
Drain engine cooling system. See Adjustment,
Coolant
Remove fan blades and pulley. See  Viscous
Coupling, Fan Blades, Pulley and Fan Cowl
Disconnect inlet hose from water pump.
Remove water pump bolts.
3.
4.
5.
Remove water pump and joint washer.
Refit
6.
Lightly grease new joint washer, position on
timing cover.
7.
Clean threads of all long bolts and coat with
Loctite 572 thread lubricant-sealant.
Locate water pump in position. Tighten
remaining water pump housing bolts evenly to
8.
28
Nm.
9.
10.
Reverse removal procedure. 1 to 3.
Check for coolant leaks around all hose
connections and joint faces.
6
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field