1995 Land Rover Discovery Workshop Manual

Mpi
INLET - EXHAUST CAMSHAFT REAR OIL PLUG
Remove
1.
2.
Remove cylinder head.
Lever out, camshaft rear oil seal plug.
For torque values.  See Specifications, torque,
Torque Values
3.
4.
5.
Fit timing belt upper backplate and tighten bolts
to the correct torque.
Fit camshaft gears noting the ’IN’ and
’EXHAUST’ identifying marks.
Fit, but do not tighten, camshaft gear centre
bolts.
Refit
6.
7.
8.
Ensure timing marks are aligned.
Fit camshaft locking tool LRT-12-060.
Tighten camshaft gear bolts to the correct
torque.
1.  Clean plug housing.
2.  Fit new plug applying force to outer edge only.
9.
10.
11.
12.
Fit timing belt.  See Camshaft Drive Belt
Adjust timing belt tension.
Remove tool LRT-12-058 from flywheel.
Fit timing belt centre cover and tighten bolts to
correct torque.
13.
14.
15.
Fit timing belt upper cover and tighten bolts to
correct torque.
Fit drive belt.  See SECTION 10, Maintenance,
Under Bonnet [Hood] Maintenance
Reconnect battery negative lead.
3.
Refit cylinder head.
REPAIR
3
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field