HEATING AND VENTILATION
Air direction
RESISTOR UNIT
Service repair no - 80.20.17
Remove
3.
4.
5.
6.
Set control fully clockwise
Release outer cable from 2 clips on unit.
Release cable from stud on flap lever.
Remove control cable from control lever.
1.
Open glove box, manoeuvre side springs
through cut-outs and lower lid.
Temperature
7.
Set RH control fully clockwise, LH control fully
anti-clockwise
8.
9.
10.
Release outer cable from 2 clips on unit.
Release cable from stud on flap lever.
Remove control cable from control lever.
2.
3.
Remove 2 screws securing resistor unit to
trunking.
Disconnect multiplug and remove resistor unit.
Refit
11.
Refit
4.
Reverse removal procedure. Check the
satisfactory function of the controls before fitting
louvre vent panel.
Reverse removal procedure.
REPAIR
3
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)