1995 Land Rover Discovery Workshop Manual

REAR SUSPENSION
Renew bush
4.  Remove mounting bracket fixings at side
member bracket.
7.
8.
Press out rubber bushes.
Fit bush centrally in housing.
5.  Remove lower link complete.
6.  Remove locknut.
7.
Remove mounting bracket from lower link.
CAUTION: Apply pressure to outer edge of
bush, and not rubber inner.
Refit
9.
Reverse removal procedure. 1 to 6. Do not fully
tighten fixings until all components are in
position.
10.
Tighten fixings to correct torque. See
Specifications, torque,  Torque Values
SUSPENSION LINK LOWER
Service repair no - 64.35.02.
Remove
Renew bush
8.
Press out rubber bushes.
9.  Fit bush centrally in housing.
1.
2.
Site vehicle on a ramp [hoist].
Alternatively, support vehicle on stands under
rear axle.
CAUTION: Apply pressure to outer edge of
bush, and not rubber inner.
3.
Remove rear fixings.
Refit
10.
Reverse removal procedure. 6 and 7. Do not
tighten locknut.
11.
12.
Reverse removal procedure. 3 to 5.
Lower vehicle, allow axle to take up static laden
position.  Tighten to 176 Nm.
REPAIR
3
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field