1995 Land Rover Discovery Workshop Manual

SFI
CAMSHAFT POSITION SENSOR (CMP SENSOR)
Service repair no - 19.22.07
Remove
Refit
8.  Clean sensor and mating face on front cover.
Lubricate NEW ’O’ ring and fit to sensor.
9.
10.  Engage CMP sensor in front cover location.
Secure with bolt.  Tighten to 8 Nm.
11.  Connect sensor multiplug and secure to bracket.
12.  Lower ramp.
1.
2.
Disconnect battery negative lead.
Raise vehicle on a ramp.
13.
Reconnect battery negative lead.
3.
4.
Release sensor mutiplug from clip located on
front cover.
Disconnect multiplug.
5.
6.
7.
Remove bolt securing sensor.
Remove sensor from front cover.
Remove ’O’ ring from sensor and discard.
REPAIR
1
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field