1995 Land Rover Discovery Workshop Manual

CLUTCH
RENEWING HYDRAULIC DAMPER - Tdi
Service repair no - 33.15.05
NOTE: All flexible and pipe connections
and joints should be tightened to 15 Nm.
Remove
1.
Remove the pipe between the slave cylinder and
damper.
2.
3.
Disconnect the hydraulic hose from the damper.
Remove the two bolts securing the damper to
the bracket and remove the damper.
Refit
4.
Fit the damper to the bracket and tighten the two
bolts.
5.
6.
Connect the flexible hose to the damper.
Fit the pipe to the slave cylinder and to the
damper and tighten the unions.
Bleed the hydraulic system.
7.
REPAIR
5
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field