1995 Land Rover Discovery Workshop Manual

AIR CONDITIONING
5.
6.
Disconnect 2 pipe unions from oil cooler. Use a
second wrench to support hose adapter.
Remove transmission oil cooler. Seal
connections.
Refit
12.  Fit new ’O’ ring to each pipe flange, lubricate
with refrigerant oil.
13.
Position receiver/drier in mounting bracket with
inlet and outlet connections correctly aligned.
Engage pipe flanges, fit bolts in turn and tighten.
Fit clamp bolt.
All models
14.
15.
Automatic gearbox
16.
17.
Refit transmission oil cooler. Use a second
wrench to support pipe unions.
Check gearbox fluid level, top-up if necessary.
All models
18.
Evacuate and recharge air conditioning system.
See Adjustment,  Refrigerant Recovery
Recycling Recharging
19.
20.
Perform a leak test on disturbed joints.
Carry out a functional check.
7.
Remove bolt securing receiver/drier clamp.
WARNING: Wear eye and hand protection
when disconnecting components
containing refrigerant. Plug all exposed
connections immediately.
8.
Move receiver/drier just sufficiently to gain
access to pipe flange bolts without distorting the
pipes.
9.
10.
11.
Remove bolt securing each pipe flange to
receiver/drier.
Disengage pipe flanges and withdraw
receiver/drier from mounting bracket.
Remove ’O’ ring from each pipe flange.
REPAIR
3
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field