1995 Land Rover Discovery Workshop Manual

82
AIR CONDITIONING
Refit
13.
14.
Fit solenoid to valve.
Fit but do not tighten screw securing solenoid to
control valve.
NOTE: Ensure arrow on control valve is
pointing in the correct recorded direction.
15.
16.
17.
18.
19.
20.
Position mounting bracket to control valve
solenoid and secure with screws.
Remove plugs from unions and control valve
connections.
Lubricate NEW ’O’ rings with refrigerant oil and
fit to valve.
Fit control valve to pipes, connect unions, but do
not tighten.
Fit and tighten screws securing control valve
mounting bracket to blower motor housing.
Tighten control valve unions to 14 Nm .
CAUTION: Use 2 spanners when loosening
or tightening air conditioning pipe unions.
9.
Remove 2 screws securing mounting bracket to
control valve.
21.  Tighten screw securing solenoid to control valve.
22.  Connect solenoid multiplug and secure to
solenoid bracket .
23.  Fit evaporator/blower motor assembly. See
evaporator/blower motor assembly - rear;
Refit
10.
11.
Remove mounting bracket.
Noting the direction arrow on control valve,
remove screw securing solenoid to valve.
Remove solenoid from valve.
12.
16
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field