AIR CONDITIONING
BLOWER MOTOR - REAR
Service repair no - 82.26.02
Remove
ELECTRONIC CONTROL UNIT - REAR AIR
CONDITIONING
Service repair no - 82.26.03
Remove
1.
Remove evaporator/blower motor assembly.
See evaporator/blower motor assembly -
rear
1. Remove rear compartment lower trim panel.
See CHASSIS AND BODY, Repair, rear
compartment lower trim panel - lh - with rear
air conditioning fitted
2.
Loosen 2 screws securing high pressure control
valve solenoid to blower motor housing.
Disconnect multiplug from blower motor.
Release blower motor cooling tube from
evaporator/blower motor housing.
3.
4.
5.
6.
Remove 3 screws securing blower motor.
Remove blower motor .
2.
3.
Disconnect multiplug from ECU.
Remove ECU from mounting bracket.
Refit
7.
Refit
4.
Position blower motor to housing and secure
with screws.
Fit ECU to mounting bracket and connect
multiplug.
Fit rear compartment lower trim panel. See
CHASSIS AND BODY, Repair, rear
compartment lower trim panel - lh - with rear
air conditioning fitted; Refit
8.
Secure blower motor cooling tube from
evaporator/blower motor housing.
Connect multiplug to blower motor.
Tighten screws securing control valve solenoid.
Fit evaporator/blower motor assembly. See
evaporator/blower motor assembly - rear;
Refit
5.
9.
10.
11.
REPAIR
13
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)