1995 Land Rover Discovery Workshop Manual

ELECTRICAL
AUTOMATIC GEAR SELECTOR-PANEL BULB
Service repair no - 86.45.40
START INHIBIT / REVERSE LIGHT SWITCH
Service repair no - 44.15.19
Automatic gearbox
1.
Disconnect battery negative lead.
Remove
Reverse light switch is an integral part of start inhibitor
switch. It is located on left hand side of gearbox,
accessible from beneath vehicle.
1.
2.
3.
4.
5.
Place vehicle on suitable ramp [hoist].
Disconnect battery negative lead.
Disconnect multi-plug.
Release clamp bolt, remove clamp.
Remove switch.
2.
3.
Carefully prise quadrant finisher out of surround.
Carefully prise rear of surround away from
centre console.
Refit
6.
7.
Fit a NEW ’O’ ring to switch.
Reverse removal procedure.
4.
5.
Pull appropriate bulb holder from fitted position.
Remove bulb from holder.
Refit
6.
Reverse removal procedure
REPAIR
7
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field