1995 Land Rover Discovery Workshop Manual

19
FUEL SYSTEM
Refit
15.
IDLE AIR CONTROL (IAC)
Service repair no - 19.22.54
Remove
Ensure locations on fuel pressure regulator and
fuel rail are clean.
16.
Fit new spacer ring and ’O’ ring to fuel pressure
regulator. Lubricate ’O’ ring with silicone grease.
Fit pressure regulator assembly to fuel rail.
Secure regulator connecting pipe in clip.
Secure with bolts.  Tighten to 10 Nm.
Align ignition coil bracket to inlet manifold studs.
Secure ignition coil bracket and fuel rail to inlet
manifold with nuts.  Tighten to 8 Nm.
Remove plugs.
17.
18.
19.
20.
21.
1.  Disconnect battery negative lead.
22.
23.
Connect return pipe to regulator connecting pipe.
Secure with clip.
24.
25.
26.
27.
Connect vacuum hose to fuel pressure regulator.
Remove cloth.
Reconnect battery negative lead.
Start engine. Check for leaks around fuel
pressure regulator, fuel feed and fuel return
unions.
2.
3.
4.
5.
Disconnect IAC multiplug.
Remove 2 bolts securing IAC to plenum.
Remove IAC.
Remove gasket and discard.
Refit
6.
7.
Ensure all mating faces are clean.
Using a new gasket, fit IAC to plenum. Secure
with bolts.  Tighten to 2.3 Nm.
Connect multiplug.
8.
9.
Reconnect battery negative lead.
12
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field