1995 Land Rover Discovery Workshop Manual

CHASSIS AND BODY
REAR SEAT CUSHION COVER
Service repair no - 76.70.88/89
Remove
SPLIT REAR SEAT LOCKING MECHANISM
Service repair no - 76.70.51
Remove
NOTE: The procedure for removing both
left and right hand seat cushions is the
same.
1.  Remove the front body side trim casing. See
front body side trim casing.
2.  Remove the three screws securing the latch to
the tower, noting that access to the single screw
is gained through the hole in the front of the
tower.
1.
Remove the rear seat assembly from the
vehicle.  See  rear passenger seat.
Remove the seat squab.
2.
3.
4.
3.  Retrieve the latch from the opening at the rear of
the tower. If necessary retrieve the single screw.
Remove the seat cushion.
Remove the cushion base cover retaining
screws and withdraw the cover.
5.
6.
Release the seat cover securing clips at the
frame and at the seat belt aperture.
Remove the cover from the cushion.
4.
The operating rod can be removed from the latch
by releasing it at the plastic clip.
Refit
7.
Refit
5.
Reverse removal procedure.
Reverse removal procedure. Setting the release
button to achieve a gap of 5 - 8 mm (3/16 - 5/16
in).
REPAIR
27
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field