19
FUEL SYSTEM
NOTE: If rotary coupler is to be re-used a
piece of adhesive tape should be placed
around the moulding in position A to
ACTUATOR - V8i
Service repair no - 19.75.12
prevent rotation. Failure to do this may result in
damage to the wires inside the coupler.
NOTE: The actuator is non serviceable, fit
a new unit if failure or damage occurs.
6.
7.
Release clips securing rotary coupler to column
stalk assembly.
Remove rotary coupler from column stalk
assembly.
Remove
1. Disconnect battery negative lead.
2.
3.
4.
Disconnect vacuum hose from actuator.
Remove nut securing actuator to throttle bracket.
Remove actuator, and manoeuvre actuator
operating link off throttle lever.
5.
Withdraw actuator.
CAUTION: Ensure front wheels are in the
straight ahead position before removal
and refitting. Store in a plastic bag. DO
NOT rotate mechanism whilst removed.
Refit
Refit
8.
Reverse removal procedure. Ensuring that the
column harnesses are not trapped by the
column shroud.
6. Inspect rubber diaphragm. Fit a new actuator
assembly if diaphragm is damaged.
7. Reverse removal procedure. Fitting the hook
uppermost.
NOTE: If original rotary coupler is to be
fitted and there is evidence of tampering, it
is imperative that the coupler is
centralised. See SUPPLEMENTARY RESTRAINT
SYSTEM, Repair, Rotary Coupler
NOTE: If a new rotary coupler is to be
fitted and the sealing tape is broken it
MUST NOT be used. Ensure rotary coupler
lugs are correctly engaged in the rear of the
steering wheel.
4
REPAIR
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)