1995 Land Rover Discovery Workshop Manual

19
FUEL SYSTEM
ENGINE CONTROL MODULE (ECM)
Service repair no - 18.30.01
Remove
MASS AIR FLOW SENSOR (MAF SENSOR)
Service repair no - 19.22.25
Remove
1.
Disconnect battery negative lead.
1.  Disconnect battery negative lead.
2.
Loosen clip and disconnect intake hose from
MAF sensor.
3.
4.
Disconnect multiplug from MAF sensor.
Release 2 clips and remove MAF sensor from air
cleaner.
2.
Release and move washer reservoir aside. See
WIPERS AND WASHERS, Repair, Washer
Reservoir
Remove 2 studs securing ECM cover.
Remove cover.
Disconnect 3 ECM multiplugs.
Remove 2 bolts securing ECM.
Release ECM from 2 lower retainers.
Remove ECM.
5.
Refit
6.
Collect ’O’ ring seal.
3.
4.
5.
6.
7.
8.
Ensure mating faces of air cleaner, MAF sensor
and intake hose are clean.
Fit ’O’ ring to MAF sensor.
Fit MAF sensor to air cleaner and secure with
clips.
7.
8.
9.
10.
Connect multiplug to MAF sensor.
Connect intake hose and secure with clip.
Refit
9.
Reverse removal procedure.
CAUTION: Failure to connect intake hose
securely will allow unmetered air to enter
the engine, causing running problems.
NOTE: Ensure ECM is correctly located by
lower retainers.
11.
Reconnect battery negative lead.
4
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field