19
FUEL SYSTEM
COOLANT TEMPERATURE SENSOR
Service repair no - 18.30.10
Remove
CRANKSHAFT SENSOR
Service repair no - 18.30.12
Remove
1.
2.
3.
4.
Position drain tin below coolant pump hose.
Disconnect sensor multiplug.
Release harness clip and harness.
Remove sensor.
1. Position vehicle on ramp [hoist].
2. Disconnect multiplug from crankshaft sensor
flylead.
3. Remove screw, release lead from bracket.
Refit
5.
6.
7.
8.
9.
Clean sensor.
Fit sensor and tighten to the correct torque.
Position harness and secure with clip.
Connect multiplug.
4.
5.
6.
Raise ramp [hoist].
Remove 2 bolts securing crankshaft sensor.
Remove crankshaft sensor.
Top-up cooling system.
Refit
7.
Clean crankshaft sensor and mating surface of
backplate.
8.
9.
Fit crankshaft sensor, fit bolts. Tighten to 7 Nm
Lower vehicle.
10.
11.
Position lead to bracket, fit and tighten screw.
Connect multiplug
2
REPAIR
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)