1995 Land Rover Discovery Workshop Manual

12
ENGINE
DRIVE PLATE - AUTOMATIC
Service repair no - 12.53.13
Remove
Refit
6.  Ensure all mating surfaces are clean.
Fit shim and hub aligner to crankshaft.
8.  Fit hub aligner screws.  Tighten to 85 Nm.
Fit drive plate and clamp ring.
7.
9.
1.
Remove automatic gearbox and torque
converter.  See AUTOMATIC GEARBOX,
Repair,  LT230T Transfer Gearbox with
Automatic Gearbox Assembly - V8i
10.  Fit clamp ring bolts.  Tighten to 45 Nm.
NOTE: It is only necessary to reshim the
drive plate when a new crankshaft or hub
aligner is fitted.
11.
Fit automatic gearbox and converter assembly.
See AUTOMATIC GEARBOX, Repair, LT230T
Transfer Gearbox with Automatic Gearbox
Assembly - V8i
ROCKER SHAFT - OVERHAUL
Service repair no - 12.29.29 - Rocker shaft -
overhaul
See Overhaul Manual 4.0/4.6 V8 Engine
TAPPETS - ENGINE SET
Service repair no - 12.29.57 - Tappets - engine set
See Overhaul Manual 4.0/4.6 V8 Engine
2.
3.
Remove 4 clamp ring bolts. Collect clamp ring.
Remove flexible drive plate/starter ring gear
assembly from hub aligner.
4.
5.
Remove 6 screws from hub aligner. Remove hub
aligner from crankshaft. Collect shim.
Check drive plate for distortion or cracks. Check
starter ring gear for chipped or broken teeth. If
either component shows signs of damage, fit a
new assembly.
14
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field