1995 Land Rover Discovery Workshop Manual

76
CHASSIS AND BODY
SILL FINISHER
BONNET [HOOD]
Service repair no - 76.16.01
Remove
Service repair no - 76.76.05
Remove
1.
Remove the nut, bolt and washer securing the
front of the sill finisher to the wing [fender]
support bracket.
Remove the screw securing the bracket at the
rear end of the finisher to the sill.
Using a suitable punch, remove the inserts from
the seven plastic retainers and withdraw the
finisher from the sill.
1.  Open the bonnet [hood] and support with the
stay.
2.  Mark the position of the hinges to the bonnet
[hood].
3.  With the assistance of a second operator,
remove the hinge to bonnet [hood] securing
screws, remove the support stay and lift bonnet
[hood] from the vehicle. Note the quantity of
shims fitted between the hinge and bonnet
[hood].
2.
3.
Refit
4.
Reverse removal procedure. Ensuring that it
aligns with the wings [fenders], cowl panel and
front grille before fully tightening the securing
bolts.
Refit
4.
Reverse removal procedure. Using new plastic
retainers.
34
REPAIR
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field