12
ENGINE
Exhaust only
CAMSHAFT DRIVE BELT
Service repair no - 12.65.17
Remove
13.
14.
Fit bolts finger tight.
Working from the centre outwards, progressively
tighten bolts to the correct torque.10Nm
NOTE: If the timing belt is to be removed
from the camshaft gears only, it is not
necessary to remove the drive belt,
crankshaft pulley or timing belt lower cover.
1.
2.
3.
4.
Remove drive belt.
Remove 5 bolts securing timing belt top cover.
Remove top cover.
Remove 5 bolts securing timing belt centre
cover.
5.
Remove timing belt centre cover.
Inlet and exhaust
15.
Fit spark plug cover to camshaft cover, tighten
screws.
6.
Rotate crankshaft to align timing marks on
camshaft gears - 90°BTDC.
20
REPAIR
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)