41
TRANSFER GEARBOX
SHIFTLOCK SOLENOID/NEUTRAL SWITCH
Service repair no - 41.10.63/64
Refit
1. Apply Hylosil or equivalent sealant to mating
faces.
This is sited on top of the transfer gearbox. Access to
the component is gained through the transmission
tunnel aperture.
2. Ensure solenoid plug lead is located in cover
recess.
3. Reverse removal procedure.
4.
Fit four solenoid bolts. Tighten to 9Nm.
Remove
Neutral switch, audible alarm
1.
2.
Disconnect battery negative lead.
Remove centre console. See CHASSIS AND
BODY, Repair, Centre Console
Remove rear passenger heater air ducts.
Remove insulation pad.
Remove four screws and remove main gear
lever assembly.
Drill out rivets and remove tunnel blanking plate.
Disconnect solenoid multiplug.
1. Disconnect neutral switch electrical plug.
2. Remove neutral switch from transfer box.
3.
4.
5.
Refit
3. Apply Hylomar PL32/L20 or SL500 sealant to
neutral switch.
4. Reverse removal procedure.
5. Switch - Tighten to 25Nm.
6.
7.
8.
Remove four retaining bolts and remove shiftlock
solenoid cover.
9.
10.
Remove solenoid and spring washer.
Clean joint sealant from mating faces.
KEY
1.
2.
3.
4.
5.
6.
7.
Gearlever
Transmission tunnel aperture
Transfer gearbox
Bolt
Switch
Solenoid
Electrical connections
4
REPAIR
| Categories | Land Rover Discovery, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)