1995 Land Rover Discovery Workshop Manual

57
STEERING
Sector shaft cover assembly
31.
Inspect cover and bearing. If worn or damaged,
replacement parts are not available, fit a new
steering box.
Sector shaft adjuster locknut
32.
The locknut is also a fluid seal. Fit new nut at
overhaul.
Valve and worm assembly
33.
34.
Examine bearing areas for wear. The areas must
be smooth and not indented.
Examine worm track which must be smooth and
not indented.
37.
38.
If required, replace all three rings, using ring
expander LRT-57-019. The expander will not
pass over rings already fitted. Remove rings to
allow access without damaging seal grooves.
Warm rings and expander tool to aid assembly.
Fit rings to expander, slide expander over valve
and worm assembly. In turn fit rings to their
grooves. Remove expander, slide valve and
worm assembly into ring compressor
LRT-57-020 and allow to cool.
Ball bearing and cage assemblies
39.
40.
Examine ball races and cups for wear and
general condition.
If ball cage has worn against bearing cup, fit
replacements.
41.
42.
Bearing balls must be retained by cage.
Bearing and cage repair is carried out by
complete replacement of assembly.
35.
36.
Check for wear on torsion bar assembly pin. No
free movement should exist between input shaft
and torsion bar or between torsion bar and
worm.
NOTE: Any sign of wear makes it essential
to fit new valve and worm assembly.
Examine valve rings for cuts, scratches and
grooves. The valve rings should be free to rotate
in grooves.
4
OVERHAUL
Product Specification
CategoriesLand Rover Discovery, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field